DuraScan Instruction Manual.pdf (PDF, 3.1 MB) Resources. Requires a highly finished sample surface for accurate measurement, as measured optically; Slow - testing can take 30-60 seconds (excluding sample preparation time) SOP. Schematic of the test sample. Our well-known companies have served research institutions, analytical laboratories as well as manufacturing companies in quality control and process applications for many decades with ever more sophisticated and reliable products which offer the solution to their individual task. They are used differently depending on the type of indentation that has to be made and measured. The results of a hardness test can indicate to us: ... either from a test coupon of from a sample from the part being tested. Some even make use of analyzing software to … Vickers is a hardness test for all solid materials, including metallic materials. Alignment of the indenter to the sample surface is crucial to correct hardness measurements. Depending on the thickness of the diffused case, will determine the load that is selected. The Vickers hardness test is done by pressing a particular indenter into the surface under testing. Hardness test-ing is one of the easiest tests to perform on the shop fl oor or in the laboratory, but it can be one of the hardest tests to do properly. The resulting indentation is measured with the aid of eyepieces and high-powered magnifying instruments like microscopes. 238 Mithun Kuruvilla et al Figure 1. The Vickers testing method is similar to the Brinell test. Hardness is a property determined by measuring the resistance to deformation from an applied load. It only makes use of one test force, unlike with other types of hardness testing, such as the Rockwell hardness test. Their main difference is in the type of indenter used for nanoindentation. The Vickers hardness test. The Vickers test is reliable for measuring the hardness of metals, and also used on ceramic materials. The hardness test loading is usually a micro hardness loading which can be varied from 10 grams up to 1000gram load mass. The Vickers test uses a pyramid-shaped probe, while the Knoop test probe has more of a rectangular edge shape. Knowledge on Vickers Hardness testing . 3.1 Sample preparation The tensile tests were conducted on both the longitudinal and transverse oriented test spec-imens that were precision machined from the as-provided mill annealed cold rolled sheet. The Vickers Hardness (HV) is calculated by measuring the diagonal lengths of an indent in the sample material left by introducing a diamond pyramid indenter with a given load. Hardness on Struers DuraScan SOP (PDF, 91.0 KB) Instruction manual. The fields of activity cover sample preparation of solids as well as analyzing technologies. The most popular tests for microhardness are the Vickers test and the Knoop test. stock.