The starter kit is the most expensive thing in the range, but it'll get you up and running with a hub, two b ulb s and a remote control. Philips Hue supports Zigbee 3.0 but it's also still compatible with the Zigbee Light Link standard protocol and, as such, Zigbee Light Link compliant products and devices work with the Hue Bridge. £65, For example, Philips Hue lights will pair just fine with the IKEA gateway. The tradfri integration allows you to connect your IKEA Trådfri Gateway to Home Assistant. The gateway speaks both Zigbee and connects to your network to offer an API based on the open standard CoAP. IKEA E1810 Tradfri Remote Control. Install a Raspberry Pi; Install Node-Red; Install the Zigbee2MQTT repository For my smart home, I have a mixture of devices using 433 Mhz (aka Nexa), Z-wave, and Ikea Trådfri (running the ZigBee protocol). So you still can’t do what the OP for this thread was asking, which was to have the Ikea zigbee end devices on a SmartThings zigbee network and then add an Ikea gateway to that same network. Until recently, I’ve been using Ikea’s Trådfri Gateway for the Trådfri devices. Ikea Trådfri gateway kit. ... Zigbee ID: "TRADFRI Remote Control" Confirmed working with. If you want to communicate with the Ikea TRADFRI remote controller, we need to setup our own Zigbee Gateway (the Ikea gateway does not allow to connect directly with the Remote). Zigbee seems to have won the IoT networking market share, so expect lots of more devices to come! IKEA Tradfri Remote Control E1810 Zigbee compatibility info. The API communication is secured via the open standard DTLS. So, it’s not just Ikea’s smart bulbs – you can also get bulbs from the likes of … ... Ikea Trådfri Zigbee signal repeater. The Gateway should in theory support all kinds of ZigBee devices including Philips Hue, Xiaomi Aqara, etc., but I was looking for a more generic solution to cover them all. ... For more information see your gateway's software documentation. CC2531 is much cheaper (around 4 €) than the Trådfri gateway; Instead of having to have multiple gateways for all vendors (Philips Hue gateway, IKEA Trådfri gateway, Xiaomi gateway), you have only one gateway for all vendors! This is the jumping-off point. Setting up a Zigbee Gateway. The gateway can control compatible Zigbee-based lights (certified Zigbee Light Link products) connected to it. Because it’s based on Zigbee, you don’t have to just buy IKEA devices the rest of your life. In the homeassistant configuration the Ikea network is essentially forming its own zigbee network and the integration is through the WiFi side.